Screw through the door side
supports into the top door bar, on
each side. Repeat for the two
center door bars.
STEP
1
Attach the bottom door bar as in
step 1. Make sure that the double
edge of the bar is the lower edge.
STEP
2
Bolt the door slider to the outside
of the top door bar. The curved end
with the door rollers should stand
above the top door bar, with the
rollers visible.
STEP
3
Make sure the door seals are in
place in the two door side support
bars, and trim any rubber that
sticks out.
Lift the door into an upright position
and ease the bottom bar onto the
door track on the front floor bar.
Slide the door slider onto the door
rail, sliding the rollers onto the
track.
Attach the plastic rail end caps on
each end of the door rail. Tighten
all the bolts in the door structure so
that the door is held firmly and
cannot wobble
STEP
7
Follow the steps below to assemble the Door.
44
44
31
STEP
4
PAGE 18
49
50
19
14
14
06
Right
Left
24
28
27
42
20
24
20
27
STEP
5
STEP
6
20
27
34
17
01
24
14
28
19
20
28
