STEP 4:
STEP 5:
Cut the cable tie, used for shipping, securing the backrest actuator. Remove the
protective material which wrapped on the head of backrest actuator. Remove the cotter
pin and bolt and set aside. As pictured below.
Remove the protective material.
Remove the cotter pin and bolt and set aside.
STEP 6:
Preferably using two people, carefully set the backrest on the cradle points on the
base. With the backrest in a vertical position, ensure it properly engages to the base.
Caution: DO NOT rest the backrest onto floor while it is vertically otherwise
damage to the backrest bracket maybe occur.
Remove the cardboard.
Set the backrest on the cradle points on the base.
the backrest properly engages to the base
Remove the two screw.
Open box 2 and remove packing materials. Take the backrest out of the box and set it
on the floor. DO NOT pull on the air hose. DO NOT pull on the backrest cable. DO
NOT pull on the pillow or damage could occur. As pictured below.
STEP 7:
Push the backrest forward and let it lean on the seat pad.
Use the bolt and cotter pin to attach the backrest and backrest actuator.
Attach backrest bracket to reclining actuator.
Lock the bolt by cotter pin.
Aline the two brackets.
