USER MANUAL
Page 5
OZ1006
TROUBLE
SHOOTING
This page summarizes the most common problems you could encounter with
the product. If you are unable to solve the problem with the information below,
contact OGAWA or its authorised dealers immediately.
The product does
not work
The product is
abnormally warm
Noise can be heard
from the product
Noise is made by the mechanical
parts of the product.
This is normal and does not mean
that the product is faulty.
The product is likely to be
overused.
Unplug the product and let it cool
down before using it again.
The product is not plugged
in properly.
Ensure the voltage on the product
corresponds to the local mains
voltage and then plug in again.
The product has just finished its
15 minutes auto timer session and has
automatically switched to standby
mode.
If you want another session, press
the On/Off button again.
You may have used the
product continuously for 30
minutes or more where the
over heat protection has
been activated.
Unplug the product and let it cool
down for 60 minutes before you
use it again.
An excessive load has
been applied on the
product.
Reduce the excessive load
and start again.
Problem
Possible Cause
Suggestions
Summary of Contents for Mobile Seat Cozmic
Page 1: ...USER MANUAL OZ1006 ...
