10
Control Buttons for the Massage Chair
1. ON / OFF
Place three AAA batteries into the controller with the positive and negative poles
correctly connected. Insert the plug of the massage chair into an appropriate outlet to
power the chair. If massage rollers are not at the waist, then they will return to their
original position (during this process, the ON / OFF indicator is lit, but no buttons work),
and the indicator will be unlit later. Long press (more than 2 seconds) the ON / OFF
button to activate the chair, the indicator will be lit, then a desired massage function
can be selected. After the chair is activated, the timer is preset at 15 minutes (The
CHERISH Auto mode is set at 20 minutes). After the chair is activated, short press
(less than 2 seconds) the ON / OFF button, the controller will be set to the power-
saving sleep mode. Short press the button again, the present massage parameters
will be displayed on the controller. Long press the ON / OFF button after the chair is
activated or the preset program ends, all functions will stop and the massage rollers
will return to their original position.
2. SHAPE & TONE
When the chair is operating, short press this button to start the SHAPE & TONE AUTO
mode, and the indicator will be lit. Press it again to close the mode.
3. REFRESH
When the chair is operating, short press this button to start the REFRESH AUTO
mode, and the indicator will be lit. Press it again to close the mode.
Note: this program is preset at 20 minutes.
4. REJUVENATE
When the chair is operating, short press this button to start the REJUVENATE AUTO
mode, and the indicator will be lit. Press it again to close the mode.
OS 3108.indd 10
OS 3108.indd 10
5/26/2016 11:28:32 AM
5/26/2016 11:28:32 AM
