
2
FÉLICITATIONS !
Vous venez d’acquérir un OGarden™ Smart
Préparez
-
vous à découvrir notre futur :
Le monde de la culture à la maison
GUIDE
DE MONTAGE RAPIDE ET D’UTILISATION
OGARDEN SMART MODEL NUMBER
OGS1002019
- WHT / BLK Electrical rating : 120/240V - 50/60Hz
- 1A
Brevet en instance
CONGRATULATIONS!
You have just acquired an OGarden ™ Smart
Prepare to discover our future:
The world of culture at home
QUICK SETUP AND USE INSTRUCTIONS
OGARDEN SMART MODEL NUMBER
OGS1002019
- WHT / BLK Electrical rating: 120 / 240V - 50 /
60Hz - 1A
patent pending
18
11
Place your OGarden….
• On a sturdy, water-tolerant surface
• It can be on the floor or on a counter but be sure
that it can support up to 160lbs (73kg)
• Near a standard electrical outlet, per local regulations
• In a 65-76°F (16-24°C) environment (optimal)
• Away from direct source of heat (e.g., stove, furnace
vents) or cold (e.g. window drafts, A/C vents)
• OGarden Smart do not need additional light or a
sunny window.
CAUTION:
Place the furniture level. Use the adjustable legs
as needed to keep the OGarden Smart stable and
horizontal.
ENGLISH
• 16 16 w 16 lock washers
• 2 bigger metal screws
• 1 plastic screw
• 8 wheel quarters with preinstalled small screws
• 8 supporting rods
• 20 culture baskets
• 2 door handles
• 1 pre-assembled device
ASSEMBLY GUIDE
ASSEMBLY VIDEO: https://ogarden.org/en/technicalsupport/
Included in the box:
Step 1.
Open the box from above and
set it down gently on the fl oor,
widthwise.
Step 5.
Assemble a screw, a washer
washer lock and a washer, then
screw everything into each holes
positioned at ends of the quarters
for the assemble with each other.
Repeat for the 8 holes recon-
ciliation. Repeat same steps to
assemble the second wheel side.
Step 2.
Set the Ogarden on (lamp up)
and remove the protective fi lm
of the LED lamp.
Step 6.
Take a holding rod, install its
base under the small screws
preinstalled on the on each
wheel quarters (fl at surface of
the rod outwards), then tighten
gently screw. You will use a total
of 8 rods.
Step 3.
Open the doors and take out
all the components of the
wheel. Install the handles on
each door.
Step 4.
Bring 4 wheel quarters
together to make a circle.
16X
16X
16X
2X
1X
support@ogarden.org | +1 833 838 3737
Notice-V3.indd 18
19-06-18 11:19