OFYR Wood Storage Corten 100, Manual, Page: 5 / 40

5 OFYR
®
MANUAL - OFYR
®
WOOD STORAGE
EN
4 OFYR
®
MANUAL - OFYR
®
WOOD STORAGE
2. SAFETY INSTRUCTIONS
Due to the considerable weight of the elements unpacking and placing of the product
should be done by at least 2 people.
While the corrosion is still superfi cial, the Corten steel elements may cause orange
stains on clothes, skin and the surface they stand on. When it rains, corrosive water
may also run off these elements, which may permanently stain light-toned stone or
wooden surfaces.
OFYR
®
Wood Storages Black are more sensitive to damage during setup and use because
of its coating.
Only place your OFYR
®
Wood Storage on a hard, leveled and stable surface.
Do not shift the OFYR
®
Wood Storage after setup. This may cause damage to the adjustable
feet or the rivet nuts with which they are attached.
Do not use the adjustable feet to change the overall height of your OFYR
®
Wood Storage.
The wood storage may become unstable if the adjustable feet are extended by
more than 10mm.
OFYR
®
Wood Storages are very heavy and should be attached to a solid wall via
the holes in the backs off the boards. If they fall over, this may cause severe or
life-threatening entrapment injuries.
No mounting hardware has been included, because diff erent types of walls require
diff erent mounting hardware. Use mounting hardware that is suitable for your type of wall.
Please contact a specialised dealer to obtain advice regarding which hardware to use.
Never leave the OFYR
®
Wood Storages unattended and keep children and pets away from the
Wood Storage.
3. DISCLAIMERS
3.1 INTENDED USE-, SAFETY- AND MAINTENANCE INSTRUCTIONS/TIPS
We are not liable for any injuries or damages as a consequence of not following our intended use-,
safety- and maintenance instructions/tips.
3.2 CORTEN STEEL
OFYR
®
Wood Storage Corten is made of Corten steel: a metal with a natural layer of corrosion that
protects against rust perforation. OFYR
®
Wood Storages corten come with the additional service
that the corrosion process has already started by the time they are delivered. Upon delivery,
it takes another 6-12 months for the initial corrosion to turn into a fully protective layer.
The unit’s color may change over time as the corrosion process may not yet have
fully unfolded. We are not liable for any color changes.