3
ofs.com
imagine a place®
800.521.5381
Assembly instructions
The Edge Canopy assembly instructions
Assemble canopy
1.
Begin by placing the three “L” shape support rails in a line as shown.
2.
Making sure the pre-drilled holes are aligned, attach seven slats to the ceiling surface of the
support rails using the supplied 2" deck screws as shown.
Attach canopy to lounger
1.
Locate the seven pre-drills on the side of the lounger end panel.
2.
Place the canopy up against the lounger and visually check to make sure all seven mounting
holes line up with one another. Once the lounger and canopy are aligned, attach the canopy to
the lounger using the supplied 1-1/2" wood screws.