13
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Slate collaborative assembly
1.
NOTE: The extension worksurface is an optional feature. Disregard this step if it is not part of
your selection.
2. Attach the apron rails to the table base using the supplied screws from the HK-10 kit at the
spacing specified above. Slide table base and rail assembly directly against the credenza
assembly. Making sure the table base and apron rails are level and square, fasten to the
credenza assembly using the remaining screws from the HK-10 kit.
Step 7: Attach extension work surface
Apron rail
3.25"
3.25"
