Ofs Impulse G2, Installation Instructions Manual, Page: 5 / 6

FREESTANDING TABLE
INSTALLATION INSTRUCTIONS
IMPULSE G2/PULSE
INSTRUCTIONS
Control
Panel
Cord
Leg Cable
Motor Cable
Mains
Cable
FREESTANDING TABLE
ASSEMBLY
Snap together motor cable ends and leg cables. (Figure A) •
Plug the other end of the motor cable to the control box. •
Plug control panel cord into control box. •
Last, plug in mains cable to control box. •
Secure cables using provided cord clips and velcro strips. •
Figure A
Table must be completely leveled before use. •
Adjust levelers by turning them in or out. •
Table must be level from side to side and front to back. •
Rev: Dwg:
Control
Panel
Cord
PAGE 3 OF 3
13. Snap together motor cable ends and leg cables. (Figure A)
14. Plug the other end of the motor cable to the control box.
15. Plug control panel cord into control box.
16. Last, plug in mains cable to control box.
17. Secure cables using provided cord clips and velcro strips.
18. Table must be completely leveled before use.
19. Adjust levelers by turning them in or out.
20. Table must be level from side to side and front to back.
Mains
Cable
Motor Cable
Figure A
Leg Cable