3
ofs.com
imagine a place®
800.521.5381
Assembly instructions
Gathr assembly instructions
Tools/hardware required:
#3 Phillips screwdriver
Hardware kit: 1/4-20 X 1.75" Phillips truss head screw
Attaching back panel
Note
: Back panels are shipped separate from seat unit. Back panels for modular units can be
upholstered, or upholstered with colonnades. Back panels for Obeya Gathr units will be upholstered
only
(Figure A)
Note
: The back panel must be attached before connecting the seats to one another.
1.
Lay the back on floor, or non-marring surface
2. The back panel has four insert nuts. Align them with the clearance holes on the seat frame.
(Figure B)
3. Fasten together using the 1/4"-20 x 1.75" screws.
Figure A
Back panel
with colonnade
Back panel
no colonnade
Pre drilled holes
Figure B
Figure C
HK-15
