Mile Marker
1
StealthLock is a Radio Frequency device which communicates at a frequency of 315Mhz, it is F.C.C. tested
and compliant for use in all areas.
There are three main components:
- Transmitter Pad (keypad)
- Receiver Latch (internal lock)
- Strike plate
Transmitter pad
- A device that only sends the signal as entered by the user
- The light on the pad indicates when a button is pressed. There
will be a flash on the pad when a button is pressed.
- The light on the pad also indicates that the single is being
transmitted by displaying a continuous light for approximately
two seconds.
NOTE: The transmitter pad does not know if the code is correct or incorrect.
Receiver latch
- Stores all programming functions
- User/supervisor code
- Mode of operation and reset features
- Fixed user
- Shared user (single-use)
-
Self-lock
- Receiver Latches are received with the factory default user code 0000 and supervisor code 071856. In
shared use mode any 4 digit user code will lock or unlock the lock and the supervisor code is 071856. The
supervisor code will unlock the lock if the user forgets their code.
Strike plate
- If there is ever an issue with the lock not unlocking, the fail-safe method
for getting into the cabinet is to force entry
- Rated 80 lbs. force
- The lock pin of the strike plate will shear off so entry can be gained and to
prevent unwanted damage to the cabinet.
- In case of theft the sheared pin will give indication of forced entry.
Batteries
- Transmitter pad: 1 CR2032 coin cell
- Receiver latch: 4 AAA batteries
- CompX recommends changing batteries annually and putting the locks on a preventative maintenance
schedule to prevent dead battery issues.
- Name brand, alkaline batteries are recommended to be used.
StealthLock functionality and trouble shooting
