MIST
MIST
LOW
MED
HI
4H
2H
1H
0.5H
OFF
TIMER
ON/SPEED
OFF
Timer setting
Misting ON/OFF
ON/SPEED
Timer Indicator
Speed Indicator
Misting Indicator
FEATURES AND APPLICATIONS
1. Use CAD optimized design with artistic looking.
2. The fan misting system adoptsthe centrifugal atomization optimized design, without nozzle and water
filtration, reasonable structure, easy maintenance.
3. Fan surface is epoxy resin coated,anti-rust and durable.The fan has water proof electrical design, safety, with
tank cart, easy to move.
4. Misting and air supply driven by different motors, motors use high quality rolling bearings, with stable
performance, low temperature rise, long life, low noise, strong overload.
5.Misting volume adjustable, pumps take full insulation enclosed protective structure for safe operation.
6. The fan with the function of oscillation and adjustable angle. easy to use, suitable for factories, residential
areas, shopping malls, sports grounds cooling, dedusting, odor removal, and also can be used in livestock farms,
greenhouses, mushroom farms and special places.
7.With a long-range smart remote control function, third speed, oscillating, timing, easy to use.
OPERATING INSTRUCTIONS
1.Use the fan under the voltage and frequency shown on the rating label, do not use in corrosive enviroment.
2.Do not use the fan above an altitude of 1000 meters and temprature above 40ºC.
3.If the fan use socket to get power supply, it should meet the IEC335-1 standard. use direct power supply by
power cord, should be installed contact separation not less than 3mm all-pole switch in the fixed wiring.
4. The fan oscillating angle adjustment: Loosen the injection oscillating screws to move to desired location
(screw more out, the greater oscillating angle), tightened injection oscillating screws. The fan pitch angle
adjustment: Loosen the fastening nut, adjust the motor to desired angle, fasten the nut.
5. Speed adjustment: press bottoms on remote control or electrical box to control the speeds.
6. Remote control operating
(1) The machine is in standby mode when power on, the buzzer beeps once.
(2) Press ON/SPEED to start, the fan start by mid-speed firstly in three seconds then switch
to work by low-speed. Press the key again is the mid-speed, the third press is high-speed, cycle
by low-speed, mid-speed and high-speed.
(3) Press the OFF key to turn off the fan.
(4) Timing setting: Press TIMER to open a total of four time profiles, 0.5H, 1H, 2H, 3H, 4H,
indicator synchronization instructions.
(5) Press MIST key to open misting, press it again to turn off, indicator synchronization
instructions.
(6)
Remote distance is less than 8M, buzzer beeps twice, shut down a long ring one second,
other operations beeps once..
