OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
5
Control Module
Control Module
Control Module:
Main Switch
- Provides power to the entire unit.
Pump Switch
- Provides power to the pump.
Heat Switch
- Provides power to the heaters.
Timer Switch
- Provides power to the timer.
Auto Cool Switch
- Automatically begins cooling at the end of the test.
Sonalert Switch
- During an alarm condition, the unit will beep only if this
switch is on.
Cool Switch
- Manually begins cooling.
Alarm Switch
- If this switch is on, the unit will enter an alarm condition
when the temperature exceeds 400°F (200°C).
Temperature Controller
- Controls the temperature in the test. (See
Timer
- Displays the current duration of the test and controls the Auto
Cool function. (See page 15 for instructions)
Cell Module:
Pressure Gauge
- Displays the pressure inside the test cell.
Regulator
- Controls the pressure inside the test cell. Turn it clockwise to
open and counter-clockwise to close.
Fill Cell Valve
- Allows the cell to fill with water, which adds pressure.
Air to Cylinder Valve
- Pumps air into the cell to displace the water and
allow it to drain.
Pressure Release Valve
- Releases pressure from the cell.
Temperature
Controller
Timer
