OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
17
1.
Select Edit → Test
2. On the Information tab, enter the necessary information.
All fields on this tab are optional.
3. On the Configuration tab, set the following parameters:
Temperature Control:
The instrument has two thermocouples. One is in
the cement sample in the cell. The other is in the heating jacket (Bath).
Use this option to determine which thermocouple will be used to control
the temperature. The “Sample” setting is recommended during testing.
The “Bath” setting is recommended during pre-heat.
Software
Setup
