17 of 30
4.2.3.2 BATTERY CONFIG SETUP
This screen allows you to select an Offshore Systems DC monitor by instance and change its
properties. First select the instance using the “UP” & “DOWN” arrows on the left (if the battery
instances have been given names this will also show up) then press enter to select. A new right
arrow button will appear once the instance has been selected. To change the values you use
the “UP” & “DOWN” arrows and to proceed to the next field you use the “RIGHT” arrow. Press
the ‘”ENTER” button at anytime to save the configuration.
4.2.3.3 BATTERY ALARM SETUP
To set an alarm firstly select the instance using the up/down buttons on the left (if the battery
instances have been given names this will also show up) then press enter to select. The first
field enables or disables the alarm. The next two fields are low/high voltage alarm values. When
the 3345 Multi function display detects a voltage under the low voltage value or higher than the
high voltage an alarm is displayed. The last temperature field will show an alarm if the display
detects a temperature higher than the set threshold. The setup can be cancelled at any time
using the exit button on the far right.
Please see next page.
