OFFICINE OROBICHE 4070 Series Instruction Manual Download Page 7

       

OFFICINE OROBICHE   S.p.A.              

7/8

 

 

24010 Ponteranica (Bergamo) ITALY - via Serena, 10 - Tel. 0039/035/4530211 - Fax 0039/035/570546 - www.officineorobiche.it-e-mail:[email protected]

 

**************************************************************************************************************************************************************** 

JULY 14 

Under reserve of modifications 

IST//130-I 

10. RECOMMENDED SPARE PARTS (*) 

 
When ordering spare parts, always indicate the instrument’s serial number. 
You can find it on the ratings plate on the case (see Fig. 12) and has 5 digits preceded by the letter “F” (e.g.: F45678). 

 
11. TROUBLE-SHOOTING 

Series 4070 level switches are not normally subject to malfunctions. 
If the level switch fails to trip, check the displacer and the micro-switch as explained at paragraph 7 MAINTENANCE. 

 
12. DISPOSAL 

Once  the  level  switches  have  reached  the end of their working life, they should be sent for disposal in accordance with 
prevailing regulations. 
During their disposal, pay special attention to the polymers, resins and rubber used in their construction (PVC, PTFE, PP, 
PVDF, neoprene, viton etc.). 
Metal  components  may  be  recycled  after removing the gaskets, special coverings as requested by the customer or other 
plastic materials. 
WARNING: 
If  mercury  bulb  micro-switches  (code  VD)  have  been  installed,  they  must  be disposed of in accordance with prevailing 
regulations concerning toxic substances; the other types of micro-switch are not subjected to these regulations. 
 

 
 
 
 
 
 
 

OFFICINE

DISCONNE

Summary of Contents for 4070 Series









Reviews: