12
Officine Gullo
DECLARATION OF COMPLIANCE
The manufacturer declares that the appliances are compliant with the prescriptions of the
EEC norm 90/396 for the gas part and with norm 73/23 for the electric part.
The installation must be done observing the norms in force particularly concerning room
ventilation and discharging gas emissions.
N.B.:
The manufacturer declines any responsibility for direct or indirect damage caused by
improper or incorrect installation, maintenance or use of the appliance and alterations, as in
all the other cases considered in the items of our sales conditions.
INSTALLATION
•
The operations for installing, conversions for use with other types of gas and starting
up must be done only by qualified personnel whose qualifications comply with the
norms in force.
•
Gas installations, the electrical connections and the rooms in which the appliances
are installed must comply with the norms in force in the Country in which the instal-
lation is carried out; above all, the appliance must be installed in a well ventilated
room, preferably under an extractor hood, so as to ensure the complete extraction of
gas emissions which are formed during combustion. The air necessary for combu-
stion is 2m3 /h per kW of power installed.
Attention:
In accordance with international rules, when connecting the appliance, an au-
tomatic device enabling the disconnection of all contacts from the mains, must be installed
above it; this device must have a contacts opening of at least 3 mm.
CHECKING FOR ADEQUATE VENTILATION
Make sure that the air intake into the room where the appliance is installed is sufficient for an
adequate change of air, as specified by regulations in effect.
The appliances installed in buildings open to the public must satisfy the following requirements.
Installation rules
The installation and maintenance of the appliance must be done according to the correct proce-
dures and regulation
texts in use, particularly:
• safety standards for the prevention of fire and panic.
Connection and installation of appliance, ventilation and exhaust removal systems, shall be done
according to the Manufacturer’s instructions and by qualified technicians and according to the
regulations in effect. The electric wiring shall conform to the regulations in effect.
All fire prevention codes shall be observed.
a) General indications
(Rules valid for GB only)
- For all appliances:
Gas safety Regulations, 1984; Health and safety at Work Act, 1974 Codes of Practice, BS 8173,
1982, The Building
