Officine Gullo ACUTAOG06, Instructions For Installation And Care

Page: 14 / 30

Officine Gullo 14
INSTALLATION GUIDELINES
IMPORTANT:
The owner/user of this product must keep this information for future reference.
To ensure this product is installed properly, you must read and follow these guidelines.
This product must be installed by a professional licensed contractor.
Be sure your installation conforms to your Country codes.
Product should be on-site prior to rough-in. This allows the installer to visualize the installation and verify the
center spread.
Inspect this product to ensure you have all the parts required for proper installation.
Use only a strap wrench or protected/smooth-jaw wrench on any finished surface.
DO NOT use putty on deck fittings. Upper O-ring and lower washers are provided.
INSPECT THE INSTALLATION:
Remove the flow restricting aerator (1.2 GPM - US EPA - Watersense) using a coin, then carefully open the cold valve
to flush out any debris in the supply lines.
Inspect all connections for leaks.