OPERATING FEATURES
1. TO ADJUST SEAT HEIGHT:
While seated, lean forward and reach under the right side
of the chair to locate the handle. Lift the handle and raise
your body up slightly to allow the chair to rise to the desired
height. To lower the seat, lift the handle while applying more
weight downward on the seat. The chair will descend until the
handle is released or the chair reaches the lowest position.
2. TO OPERATE TILT LOCKOUT:
3. TO ADJUST TENSION ON THE TILT:
Reach under the front center of the chair, grasp the round
knob and turn counterclockwise to make the tilt mechanism
knob clockwise until the desired resistance is found.
1
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are
securely tightened.
3.
Save the hexagonal wrench.
Check that all bolts, screws and
knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic
cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
6. Use this chair for its intended purpose only.
7. The casters sold with this chair are intended for use on
carpet. They are not recommended for use on tile or hard-
A S S E M B LY I N S T R U C T I O N S
the height adjustment handle. Pull the handle all the way out
(away from the cylinder) to allow the chair to tilt backwards.
To lock the chair in the upright or vertical position, sit upright
and push the handle in towards the cylinder.
4. TO DISASSEMBLE THE BACK CUSHION:
Standing behind the chair, press the button on both sides of the
chair armrests to release the pins. Both pins must be disengaged
at the same time. Push the back cushion forward and fold the
back cushion on seat cushion.
S T E L L A R M I D - B A C K C H A I R
WWW.OFFICIENTFURNITURE.COM
