© Office Star Products December 2013
2
1
PART QTY
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . . . . 1
4. Bellows . . . . . . . . . . . . . . . . . . . . . 1
5. Mechanism . . . . . . . . . . . . . . . . . . 1
6. Seat Cushion . . . . . . . . . . . . . . . . . 1
7. Back Cushion . . . . . . . . . . . . . . . . 1
8. Arms (8L & 8R) . . . . . . . . . . . . . . . 2
9. Short Screws . . . . . . . . . . . . . . . . . 4
10. Long Screws . . . . . . . . . . . . . . . . 8
11. Plastic Caps . . . . . . . . . . . . . . . . . 8
12. Allen Wrench (not shown) . . . . . . 1
OPH61601 / OPH61606 / OPH61607
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
4
10
9
8L
8R
6
5
STEP 1
STEP 2
STEP 3
STEP 4
11
3
7
STEP 5
10
6
3
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder (3) into Base (1).
STEP 2
Attach Mechanism (5) to Seat Cushion (6) with the arrow towards the front of the chair using four Short Screws (9).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3
Attach Arms (8L & 8R) to Back Cushion (7) using two Long Screws (10) for each Arm (8R & 8L).
DO NOT FULLY TIGHTEN SCREWS.
STEP 4
Attach Arms (8L & 8R) to Seat Cushion (6) using two Long Screws (10) for each Arm (8R & 8L).
FULLY TIGHTEN ALL SCREWS
USING ALLEN WRENCH (12).
Cover holes in Arms (8L & 8R) using four Plastic Caps (11) for each Arm (8).
STEP 5
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
11
8R
8L