Office Star Products WORK SMART ECH8501, Operating Instructions

Page: 1 / 2

ECH8501 / ECH8506 / ECH8507
FAUTEUIL DE DIRECTION EN CUIR ECO
INSTRUCTIONS DE MONTAGE
ECH8501 / ECH8506 / ECH8507
EXECUTIVE ECO LEATHER CHAIR
OPERATING INSTRUCTIONS
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever
(1). To lower seat height sit on chair and lift lever (1).
NOTE:
It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock return
chair to the upright position and push lever (1) in. To unlock pull
lever (1) out.
NOTE: Be careful not to loosen the back tilt adjustment
knob completely.
LIMITED WARRANTy
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
1
2
© Office Star Products Septembre 2011
1
10
9
2
3
4
5
7
ÉTAPE
1
ÉTAPE
4
ÉTAPE
2
ÉTAPE
3
6
8L
8R
11, 12
3
6
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et
vérifier les quantités des pièces.
ÉTAPE 1
Insérer les cinq Roulettes (2) dans la Base (1). Pousser fermement jusqu’à ce que les Roulettes (2) s’encliquettent. Insérer le Vérin pneumatique
(3) dans la Base (1), et glisser le Soufflet (4) sur le vérin pneumatique (3).
ÉTAPE 2
Fixez les bras (8L et 8R) au Coussin du siège (6) et à Coussin dudossier (7) avec quatre Vis pour les bras (11) pour chaque Bras (8R et 8L).
SERREZ TOUTES LES VIS COMME IL FAUT AVEC LA CLÉ ALLEN (13) . Recouvrez les trous dans les Bras (8L et 8R) avec quatre
Bouchons en plastique (12) pour chaque Bras (8).
ÉTAPE 3 Fixez la Plaque du siège (5) au Coussin du siège (6) avec la flèche vers l’avant de la chaise. Fixez l’arrière de la Plaque du siège (5) avec deux Vis
courtes (9) et deux Vis longue (10) pour l’avant de la Plaque du siège (5).
SERREZ TOUTES LES VIS COMME IL FAUT AVEC
LA CLÉ ALLEN (13).
ÉTAPE 4
Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . 5
3.
Vérin Pneumatique . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . 1
5.
Plaque du Siège . . . . . . . . . . . . . . 1
6. Coussin du Siège . . . . . . . . . . . . . 1
7.
Coussin du dossier . . . . . . . . . . . . 1
8. Bras (8R et 8L) . . . . . . . . . . . . . . . 2
9.
Vis courte . . . . . . . . . . . . . . . . . . . . 2
10. Vis longue . . . . . . . . . . . . . . . . . . 2
11.
Vis pour les bras . . . . . . . . . . . . . 8
12. Bouchons en Plastique . . . . . . . . 8
13.
Clé Allen (non montré) . . . . . . . . . 1