ECH52661-EC1 / ECH52666-EC3
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products August 2011
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3)
into Base (1) and slip Bellows (4) over Pneumatic Cylinder (3).
STEP 2
Attach Seat Plate (5) to Seat Cushion (6) with the arrow towards the front of the chair, using four Medium Screws (10).
TIGHTEN ALL FOUR SCREWS COMPLETELY.
STEP 3
Attach Back Support (12) to Seat Plate (5) using three Short Screws (9).
AS SHOWN IN DETAIL A. FULLY TIGHTEN ALL SCREWS.
STEP 4
Align the holes in the Arms (8L and 8R) with the holes on the bottom of the Seat Cushion (6). Attach Arms (8L and 8R) to Seat Cushion (6) using three
Long Screws (11) for each arm (8).
FULLY TIGHTEN ALL SCREWS.
STEP 5
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . 1
4.
Bellows . . . . . . . . . . . . . . . . . . . . 1
5.
Seat Plate . . . . . . . . . . . . . . . . . . 1
6.
Seat Cushion . . . . . . . . . . . . . . . . 1
7.
Back Cushion . . . . . . . . . . . . . . . 1
8.
Arms (8L & 8R) . . . . . . . . . . . . . . 2
9.
Short Screws . . . . . . . . . . . . . . . . 3
10.
Medium Length Screws . . . . . . . 4
11.
Long Screws . . . . . . . . . . . . . . . 6
12.
Back Support (Pre-Installed) . . . 1
13.
Allen Wrench . . . . . . . . . . . . . . . 1
10
DETAIL A:
Assemble Back
Support (12) under Seat
Plate (5).
13
12
5
3
2
1
10
6
4
8L
7
12
11
8R
5
9
11
