ST428V
TASK CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products January 2010
Remove all the parts from carton, separate them into part numbers indicated
on the list and make sure part quantities are correct.
STEP 1
Insert five Casters (2) into Base (1), push hard until you hear or feel Caster (2) snap into place. Insert Pneumatic Cylinder (3)
into Base (1).
STEP 2
Attach Seat Plate (4) to Seat Cushion (5) with the arrow towards the front of the chair using four Screws (7).
TIGHTEN ALL FOUR SMALL SCREWS (7) COMPLETELY USING ALLEN WRENCH (14).
STEP 3
Place the assembled seat on top of Pneumatic Cylinder (3) and apply pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Seat Plate . . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . 1
7.
Screws . . . . . . . . . . . . . . . . . . . . . . 4
8.
Allen Wrench (not shown) . . . . . . . 1
STEP 1
2
3
3
STEP 2
4
7
5
5
STEP 3
1
