STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
© Office Star Products March 2012
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Mechanism . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . 1
6.
Back Assembly . . . . . . . . . . . . . . . 1
7.
Arms (7L & 7R) . . . . . . . . . . . . . . . 2
8.
Flat Washers . . . . . . . . . . . . . . . . 10
9.
Arm Screws . . . . . . . . . . . . . . . . . . 6
10.
Mechanism Screws . . . . . . . . . . . 4
11.
Back Support Screws . . . . . . . . . 3
12.
Back Support (Pre-Installed) . . . . 1
13.
Allen Wrench . . . . . . . . . . . . . . . . 1
7L
7R
1
1
X3
X3
X3
X3
X3
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Attach Arms (7L & 7R) to Seat Cushion (5) using three Flat Washers (8) and three Arm Screws (9) for each arm.
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (13).
STEP 3
Attach Mechanism (4) to Seat Cushion (5) with the arrow towards the front of the chair, using four Flat Washers (8) and four Mechanism
Screws (10),
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (13).
STEP 4
Attach Back Support (12) to rear of Mechanism (4) using three Back Support Screws
(11),
TIGHTEN ALL SCREWS COMPLETELY
USING ALLEN WRENCH (13).
STEP 5
Insert Pneumatic Cylinder (3) into Base (1), Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
2
3
4
5
5
6
9
8
13
13
10
8
11
12
13
9
8
X5
X4
X4
4
215-3R2C62R5 / 215-4R2C62R5
SpaceGrid BACK MANAGER’S CHAIR
ASSEMBLY INSTRUCTIONS
®
