PART
QTY
1. Base Frame . . . . . . . . . . . . . . . . . . 1
2. Seat Cushion . . . . . . . . . . . . . . . . . 1
3. Backrest . . . . . . . . . . . . . . . . . . . . . 1
4. Long Screws . . . . . . . . . . . . . . . . . 4
5. Lock Washers . . . . . . . . . . . . . . . . 4
6. Short Screws . . . . . . . . . . . . . . . . . 4
7. Plastic Cover . . . . . . . . . . . . . . . . . 1
8. Allen Wrench (not shown) . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Attach Base Frame (1) to Seat Cushion (2) using four Long Screws (4) and four Lock Washers (5),
FULLY TIGHTEN ALL
SCREWS USING ALLEN WRENCH (8).
STEP 2
Attach Backrest (3) to Base Frame (1) using four Short Screws (6),
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH (8).
STEP 3
Slide Plastic Cover (7) down onto Seat Cushion (2) and apply pressure to snap into place.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
84510
VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products July 2008
STEP 1
STEP 2
STEP 3
1
1
2
2
3
4
5
6
7