PART
QTY
1. Base Frame . . . . . . . . . . . . . . . . . . 1
2. Caster . . . . . . . . . . . . . . . . . . . . . . 4
3. Seat Cushion . . . . . . . . . . . . . . . . . 1
4. Backrest . . . . . . . . . . . . . . . . . . . . . 1
5. Arm Pad . . . . . . . . . . . . . . . . . . . . . 2
6. Metal Bracket . . . . . . . . . . . . . . . . . 2
7. Plastic Bracket . . . . . . . . . . . . . . . . 4
8. Short Screws . . . . . . . . . . . . . . . . . 2
9. Long Screws . . . . . . . . . . . . . . . . . 4
10. Allen Bolts . . . . . . . . . . . . . . . . . . 4
11. Allen Wrench (not shown) . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Attach Arm Pads (5) to Base Frame (1) using two
Long Screws
(9) for each Arm Pad (5). Attach Plastic Brackets (7) to Base Frame (1)
and secure Base Frame (1) to Seat Cushion (3) using two Metal Brackets (6) and four Allen Bolts (10),
SEE DETAIL A.
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (11).
STEP 2
Slide Backrest (4) onto Base Frame (1) and secure using two Short Screws (8).
FULLY TIGHTEN ALL SCREWS.
Insert four Casters (2) into Base Frame (1), push hard until you feel or hear the Caster (2) snap into place.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
84330
VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products May 2009
STEP 1
STEP 2
5
3
9
8
7
1
6
10
4
2
DETAIL A
Phillips Screwdriver also needed for assembly
(not provided)