FL642 FAUX LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products November 2007
STEP 1
1
2
6
6
7
3
3
9
4
5
8L
9,10
8R
STEP 2
STEP 3
STEP 4
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Bellows . . . . . . . . . . . . . . . . . . . . . 1
5.
Mechanism . . . . . . . . . . . . . . . . . . 1
6.
Seat Cushion . . . . . . . . . . . . . . . . . 1
7.
Back Cushion . . . . . . . . . . . . . . . . 1
8.
Arms Left (8L) Right (8R). . . . . . . . 2
9.
Screws . . . . . . . . . . . . . . . . . . . . . 12
10.
Caps . . . . . . . . . . . . . . . . . . . . . . 8
11.
Allen Wrench (not shown) . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1) and
slip Bellows (4) over Pneumatic Cylinder (3).
STEP 2
Attach Arms (8L & 8R) to Seat Cushion (6) and Back Cushion (7), using four Screws (9) for each Arm (8),
FULLY TIGHTEN AL
L SCREWS.
Cover each hole on Arms (8L & 8R) using eight Caps (10).
STEP 3
Attach Mechanism (5) to Seat Cushion (6) with the arrow towards the front of the chair, using four Screws (9)
TIGHTEN ALL FOUR SCREWS COMPLETELY.
STEP 4
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
