FL2604C
EXECUTIVE FAUX LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products June 2013
1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3)
into Base (1) and slip Bellows (4) over Pneumatic Cylinder (3).
STEP 2
Attach Seat Plate (5) to Seat Cushion (6) with the arrow towards the front of the chair, using four Short Screws (9).
FULLY TIGHTEN ALL SHORT SCREWS (9) USING ALLEN WRENCH (12).
STEP 3
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
STEP 4
Attach Arms (8L & 8R) to Seat Cushion (6) using two Long Screws (10) for each Arm (8).
DO NOT FULLY TIGHTEN SCREWS.
STEP 5
Attach Back Cushion (7) to Arms (8L & 8R) using two Long Screws (10) for each Arm (8).
APPLY FIRM PRESSURE TO ALIGN AND
FULLY TIGHTEN ALL LONG SCREWS (10) USING ALLEN WRENCH (12).
STEP 6
Cover holes in Arms (8L & 8R) using one Arm Cover (11) for each Arm (8).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Bellows . . . . . . . . . . . . . . . . . . . . . 1
5.
Seat Plate . . . . . . . . . . . . . . . . . . . 1
6.
Seat Cushion . . . . . . . . . . . . . . . . . 1
7.
Back Cushion . . . . . . . . . . . . . . . . 1
8.
Arms (8R & 8L) . . . . . . . . . . . . . . . 2
9.
Short Screws . . . . . . . . . . . . . . . . . 4
10.
Long Screws . . . . . . . . . . . . . . . . 8
11.
Arm Cover . . . . . . . . . . . . . . . . . . 2
12.
Allen Wrench (not shown) . . . . . . 2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
4
7
9
2
5
8L
10
3
6
8R
11
3
6
10
8R
8L
