EM59722
MANAGER’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products September 2012
5
3
1
2
6
7R
7L
4
8
9
9
10
10
11
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder w/ Bellows (3) into Base (1).
STEP 2
Attach Seat Plate (4) to Seat Cushion (5) with the arrow towards the front of the chair using Long Hex Screws (10) for front of Seat
Cushion (5) and two Short Hex Screws (9) for rear of Seat Cushion (5).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3
Attach Arms (7L & 7R) to Seat Cushion (5) using two Long Hex Screws (10) for each Arm (7),
DO NOT FULLY TIGHTEN SCREWS
.
Secure Backrest (6) to Arms (7L & 7R) using two Short Round Screws (8) for each Arm (7).
FULLY TIGHTEN ALL SCREWS USING ALLEN
WRENCH (12).
Cover holes in Arms (7L & 7R) using two Plastic Caps (11) for each Arm (7).
STEP 4
Place the assembled seat on top of Pneumatic Cylinder w/ Bellows (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder w/ Bellows . . . 1
4.
Seat Plate . . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . 1
6.
Backrest . . . . . . . . . . . . . . . . . . . . . 1
7.
Arms (7L & 7R) . . . . . . . . . . . . . . . 2
8.
Short Round Screws . . . . . . . . . . . 4
9.
Short Hex Screws . . . . . . . . . . . . . 2
10.
Long Hex Screws . . . . . . . . . . . . 6
11.
Plastic Caps . . . . . . . . . . . . . . . . . 4
12.
Allen Wrench (not shown) . . . . . . 1
10
10
