EM59722-3 & EM59722-U6
SCREEN BACK DESIGNER CONTOURED
SHELL CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products July 2010
1
2
3
4
5
6
7L
12
11
10
9
8
8
7R
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic
Cylinder w/ Bellows (3) into Base (1).
STEP 2
Attach Seat Plate (4) to Seat Cushion (5) with the arrow towards the front of the chair, secure rear of Seat Plate (4) using two
Flat Washers (8) and two Medium Screws (10), secure front of Seat Plate (4) using two Flat Washers (8) and two Long Screws (11).
STEP 4
Align holes in Arms (7L & 7R) with holes in Seat Cushion (5) and Back Cushion (6). Secure Arms (7L & 7R) to Seat Cushion (5) using
two Flat Washers (8) and two Long Screws (11) for each Arm (7). Secure Arms (7L & 7R) to Back Cushion (6) using two Flat Washers (8) and
two Short Screws (9) for each Arm (7).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13). Cover holes in Arms (7L & 7R) using
two Plastic Caps (12) for each Arm (7).
STEP 5
Place the assembled seat on top of Pneumatic Cylinder w/ Bellows (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder w/ Bellows . . . 1
4.
Seat Plate . . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . 1
6.
Back Cushion . . . . . . . . . . . . . . . . 1
7.
Arms (7R & 7L) . . . . . . . . . . . . . . . 2
8.
Flat Washers . . . . . . . . . . . . . . . . 12
9.
Short Screws . . . . . . . . . . . . . . . . . 4
10.
Medium Screws . . . . . . . . . . . . . . 2
11.
Long Screws . . . . . . . . . . . . . . . . 6
12.
Plastic Caps . . . . . . . . . . . . . . . . . 4
13.
Allen Wrench (not shown) . . . . . . 1
11
8
8