EC22070-EC3
EXECUTIVE ECO LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products February 2010
STEP 1
2
3
5
4
10
9
8L
6
1
PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . . . . 5
3. Cylinder . . . . . . . . . . . . . . . . . . . . . 1
4. Bellows . . . . . . . . . . . . . . . . . . . . . 1
5. Seat Plate . . . . . . . . . . . . . . . . . . . 1
6. Seat Cushion . . . . . . . . . . . . . . . . . 1
7. Back Cushion . . . . . . . . . . . . . . . . 1
8. Arms (8L & 8R) . . . . . . . . . . . . . . . 2
9. Screws . . . . . . . . . . . . . . . . . . . . . 12
10. Plastic Caps . . . . . . . . . . . . . . . . . 8
11. Allen Wrench (not shown) . . . . . . 1
9
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1) and slip
Belows (4) over Pneumatic Cylinder (3).
STEP 2
Attach Seat Plate (5) to Seat Cushion (6) with the arrow towards the front of the chair, using four Screws (9),
FULLY TIGHTEN SCREWS (9).
STEP 3
Align holes of Arms (8L & 8R) with holes of Seat Cushion (6) and Back Cusion (7), secure Arms (8L & 8R) using four Screws (9) for each Arm,
FULLY TIGHTEN ALL SCREWS (9).
Cover holes in Arms (8L & 8R) using eight Plastic Caps (10).
STEP 4
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
STEP 2
STEP 3
STEP 4
3
8R
6
7
