Remove all the parts from carton, separate them into part numbers indicated on the list and make sure part quantities are correct.
STEP 1
Insert five casters (B) into base (A), push hard until you feel or hear the caster (B) snap into place. Insert pneumatic cylinder (C) into base (A) and
slip bellows (D) over pneumatic cylinder (C).
STEP 2
Attach seat plate (E) to seat cushion (H) with the arrow towards the front of the chair using two bolts (3) for front holes and two bolts (2) for
rear holes.
FULLY TIGHTEN BOLTS.
STEP 3
Attach backrest (G) to rear of seat cushion (H) using three bolts (1).
FULLY TIGHTEN BOLTS (1).
STEP 4
Attach arms (FL & FR) to seat cushion (H) using three bolts (2) for each arm (F).
FULLY TIGHTEN BOLTS (2).
STEP 3
STEP 4
(1)
(H)
(G)
(2)
(FR)
(2)
(FL)
(G)
STEP 1
STEP 2
(D)
(C)
(A)
(B)
(H)
(E)
(3)
(2)
ROG25
ROGUE GAMING CHAIR
ASSEMBLY INSTRUCTIONS
ROG25
ROGUE GAMING CHAIR
ASSEMBLY INSTRUCTIONS
PART QTY
A.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
B.
Caster . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
C.
Pneumatic Cylinder . . . . . . . . . . . . . . . . . . .1
D.
Bellows . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
E.
Seat Plate . . . . . . . . . . . . . . . . . . . . . . . . . .1
F.
Left and Right Arm . . . . . . . . . . . . . . . . . . . .2
G.
Backrest . . . . . . . . . . . . . . . . . . . . . . . . . . .1
H.
Seat Cushion . . . . . . . . . . . . . . . . . . . . . . .1
I.
Power Adapter . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE QTY
1.
Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.
Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3.
Bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
4.
Allen Wrench (not shown) . . . . . . . . . . . . . .1