TECHNICAL SPECIFICATIONS
Name of the Product:
Electric Treadmill
Rate of voltage:
220-240V
Frequency rate:
50/60 HZ
Power rate:
600W
Max Weight:
100 kg
HOW TO TAKE CARE OF THE DEVICE
To keep the Office Fitness ActiDesk Treadmill in good condition for longer, avoid areas
which are usually wet or highly dusty.
Position the machine on flat and firm surfaces.
Make sure that the device is unplugged before cleaning and moving the treadmill.
When cleaning the machine avoid course materials and use a damp cloth but do not
touch the control panel.
To clean the control panel and the power switch, use a soft, dry cloth. Avoid using a wet
rag in these areas.
MAINTENANCE - LUBRICATING WITH SILICONE OIL
The treadmill comes lubricated when purchased. It should then be lubricated every 30th time
it is used (or once every other month). Squeaking noises are a sign of needing to spray with
oil. Turn off the power, lift up the rubber mat on the right side with one hand and spray
silicone oil moderately along the whole sliding surface. Do the same on the left side.
Additionally, apply oil along bar below belts on both sides of machine and run for 2-4 min.
Turn on the belt at its lowest speed and walk for roughly three minutes so the silicone oil is
evenly spread out.
HOW TO USE THE OFFICE FITNESS TREADMILL
Plug the treadmill into the socket.
Put the emergency stop magnet on the top
of the emergency stop switch.
When you hear the control panel beep, it
means that the power is on and it is on the
standby mode. This will be indicated on the
LED display.
Before you start the treadmill, be sure to
attach to your waist band the stop magnet.
1
2
3
4
1
2
3
4
5
