2
Do not tighten bolts fully until you have completed assembly.
DO NOT USE A POWER DRILL TO TIGHTEN THE SCREWS.
TIGHTEN BY HAND WITH THE ALLEN KEY PROVIDED.
DO NOT STAND ON THIS CHAIR.
DO NOT USE THIS CHAIR AS A STEP LADDER.
USE THIS PRODUCT FOR SEATING ONE PERSON AT A TIME ONLY.
DO NOT USE THIS CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE FIRMLY SECURED.
AT LEAST EVERY 6 MONTHS ,CHECK ALL BOLTS, SCREWS AND KNOBS TO BE SURE THEY ARE TIGHT.
IF PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USING THIS PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORISED PARTS.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
WARNING
1
3
5
6
4
2
E×2
C×4
A
B×5
D
E×2
E×1
E×1
E×1
E×1
F×4
F×4
Loosely attach the arms to the seat using 2 x screw E for each arm
with the Allen Key provided – DO NOT TIGHTEN UNTIL THE CHAIR IS
ASSEMBLED AS INSTRUCTED IN IMAGE “5”.
Place the seat onto the assembled base as shown in the image.
Front
Now put the back into place and attach to the arms using 2 x screw E for each arm - DO NOT
TIGHTEN UNTIL THE CHAIR IS ASSEMBLED AS BELOW IMAGE.
Please insert the screw covers F.
Summary of Contents for ORACL001
Page 3: ...3 2 3 1 1 2 3...
