7
3.
Setting up COSTA
The handbike’s shipping setup matches the order form. The selected
parameters in the order form, should fit the customer at best. It is still possible
to perform further setup adjustments to meet even more the user’s needs.
Please refer to authorized and qualified personnel only to perform any
type of adjustment on the handbike.
3.1 Setting the height of the seat
To change the seat height:
•
Unscrew completely and remove the plate-holding screw from the
adjusting plate attached to the handbike’s frame.
•
Change the height of the seat matching the holes both in the plates and
the frame.
•
Put the screw back and tighten it.
3.2 Setting the foot-rest position
To change the foot rest position (horizontally):
•
Unscrew the bracket-holding screw at the end of the foot rest.
•
Move the foot-rest to the preferred position
•
Tighten the screw.
Bracket-holding screw
Plate-holding screw