OEZ MP-BC-X B Series, Instructions For Use Manual, Page: 8 / 49

Z00
Motor drive automatic mode presetting
edvolby automatického provozu motorového pohonu
21
- 8 -
991150f
Switch
position
Automatic
mode
Preset
Preset
description
Circuit breaker
switching off
to position **)
Circuit breaker
loading to
position
Circuit breaker
switching on to
position
1 *)
2
3
Automatic
winding up
is on
Automatic
winding up
is off
Simultaneous
loading and
switching on
- By overcurrent
release
By inspection
push-button
- By auxiliary
release
Motor drive
performs
automatically
The operator must press
the button
By pressing the ON button, the circuit
breaker motor drive is loaded and
switched on ***)
Pressing the ON
button
Pressing the ON
button
By TEST button
Motor drive is out of operation, red LED goes on. In this mode the drive cannot
be remotely controlled by ON and OFF signals. However there is full supply
voltage on the drive, and this mode must not be used for the case of drive
handling by the operator!
*) Standard factory setting of the switch
**) When the circuit breaker is switched off by motor drive electrically by OFF button, the circuit
breaker control lever will get automatically into the loaded position irrespective of automatic
mode setting.
***) By pressing the OFF button, the circuit breaker motor drive is only loaded to position .
Mode
Auto
ON
Auto
OFF
2 in 1
Warning!
Mode 1
Režim 1
Mode 2
Režim 2
Mode 3
Režim 3