manualshive.com logo in svg

OETIKER EPC 01, Instruction Manual, Page: 63 / 98

Share
Download
OETIKER EPC 01 Instruction Manual Download Page 63

63

www.oetiker.com

OETIKER EPC 01

MaInTenanCe anD RePaIR

Issue 11.22

08905306

10 3  Perform maintenance according to the maintenance schedule

 

►

Maintain the ePC 01 as specified in the maintenance schedule:

When?

Where?

What?

Weekly

ePC 01

 

►

Clean the ePC 01 (

see chapter 10.3.1

).

Monthly

Pincer head

 

►

lubricate the pincer head (

see chapter 10.3.2

).

annually or after  
250,000 closures

Pincer

 

►

Have the pincer or pincer head serviced (

see chapter 10.3.4

)

Pincer head

as needed

Pre-filter

 

►

Check and change the pre-filter (

see chapter 10.3.3

)

10 3 1 Cleaning the EPC 01

 

9

Maintenance prepared.

CAUTION

Material damage due to aggressive cleaning agents!

 

►

Clean the ePC 01 exclusively with water. 

 

►

Do not use aggressive cleaning agents.

1.  In the event of minor contamination, clean the ePC 01 with a dry cloth.
2.  In the event of heavy soiling, clean the ePC 01 with a damp cloth.
3.  Completion of maintenance (

see chapter 10.2.2

).

10 3 2 Lubricating the pincer head

The rollers and plunger are mechanically stressed parts on the pincer head, and must be lubricated regularly,  
but at least monthly.

 

9

Maintenance prepared.

1.  Make sure that the compressed air supply is disconnected 

and the Control Unit is de-energized.

2.  lubricate the pincer head (1) at the grease nipple (3) using 

a grease gun and the correct grease (

see chapter 13.1.6

).

3.  Check the pincer jaws (2) for wear and chipped clo-

sure edges, replace them if necessary  
(

see chapter 10.4.3

).

4.  Check the pincer and Control Unit for mechanical damage.
5.  Replace any defective parts.
6.  Completion of maintenance (

see chapter 10.2.2

).

1

2

3

Summary of Contents for EPC 01



































































































Reviews:

No comments