background image

8

Operating Instructions and Parts Manual 

24814

2/18

2018 OEMTOOLS

PLASMA CUTTER  

110/220V 40 AMP

CONTACT US

3580 E. Raines Road, Suite 3, Memphis, TN 38118

Tel: 1-866-458-2472

www.oem-tools.com

OEMTOOLS

 One Year Warranty

For up to one year from the date of purchase of this OEMTOOLS

 product, if you find any defect in material or 

workmanship (through normal usage), return it to the place of purchase or to OEMTOOLS

 for repair or replacement at 

our discretion. In order to obtain this service, send the product and proof of purchase (transportation pre-paid) to: 
OEMTOOLS

 Q.A. Dept, 3580 E. Raines Road #3, Memphis, TN 38118. 

We will not be responsible for lost or damaged goods during transportation; please insure your package. If our 

inspection verifies the defect, we will either repair or replace the product, or we may elect to refund the purchase price 

if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if 

we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you 

must bear the cost of returning the product. 
OEMTOOLS

 does not provide warranty for products labeled other than OEM

®

 or OEMTOOLS

. OEMTOOLS

 will 

not provide any warranty for products subjected to abnormal use. Abnormal use includes (but is not limited to) abuse, 

accident, alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does not cover bits, 

blades, files, batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits, 

files, and batteries as necessary. OEMTOOLS

 reserves the right to make any changes in construction or design at 

any time without any obligation in incorporating such changes to tools or equipment previously sold.   OEMTOOLS

 

makes every effort to ensure that its products meet high quality and durability standards, and warrants to the original 

purchaser that this product is free from defects in materials and workmanship for the period of one year from the 

date of purchase. This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence or 

accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear or to 

lack of maintenance. 
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or 

consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY 

IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS. This warranty gives you specific legal rights, and you may also have other rights, 

which vary from state to state.
Don’t forget to register your new OEMTOOLS

 product at www.oem-tools.com.

Summary of Contents for Cut-40









Reviews: