3
Operating Instructions and Parts Manual
87032
9 GALLON UPRIGHT
PORTABLE OIL DRAIN
6/17
2017 OEMTOOLS
™
33. This equipment is designed for servicing a variety
of engines in a safe, convenient manner. However,
differences in engine makes and models may make it
impossible to use this equipment as it is intended. DO
NOT attempt to force the use of this equipment on an
application for which it is not designed to perform.
34. The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
35. In addition to these guidelines, always follow the
manufacturer’s recommended procedures when
servicing each unique vehicle.
36. The use of this equipment is simple and straightforward
if you follow the instructions. When operating this
equipment, use common sense, and only use this 9
Gallon Upright Portable Oil Drain for its intended purpose.
PRODUCT DESCRIPTION
The 9 Gallon Upright Portable Oil Drain is designed to
efficiently drain waste oil from a vehicle.
PRODUCT SPECIFICATIONS
Funnel Diameter: 17"
Capacity:
9 Gallons
Adjustable Drain Height:
32" to 62"
CONTENTS
Funnel, upper tube, funnel screw, adjustable tube clamp,
lower tube, tool tray, screw for tool tray, adjustable tank
clamp, oil tank, drain cap and (4) casters
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
1. Not designed for use with gasoline.
2. DO NOT exceed rated capacity. Overloading can cause
damage or failure of the oil drain.
3. Keep hands clear of all adjustment points during
assembly, usage and transport.
4. Only use oil drain on dry, oil/grease free, level, ground
surfaces. Ensure the surface can support the weight of
the drain at capacity.
5. Wear protective clothing, gloves and eyewear while
working with used fluids.
6. Allow engine to cool before servicing vehicle.
7. DO NOT leave oil drain unattended while operating or
evacuating oil.
8. Never use or store near open flames or heat sources.
9. DO NOT leave under automotive lift while lowering the
vehicle to the ground surface.
DISPOSAL
At the end of the useful life of the 9 Gallon Upright
Portable Oil Drain, dispose of the components according
to all state, federal and local regulations.
ASSEMBLY
1. Remove all contents from the package.
2. Insert the funnel (A) into the upper tube (B) and use the
small tightening screw (C) to tighten the funnel into place.
3. Place the adjustable tube clamp (D) at the midpoint
of the upper tube (B); the positioning of this clamp
determines the height of the drain.
4. Slide the tool tray (F) to the midpoint of the lower tube
(E) and tighten into place using the tool tray screw (G).
5. Insert at least 4” of the lower tube (E) into the oil tank
(H) and tighten into place using the adjustable tank
clamp (I).
6. Screw the drain cap (J) onto the oil tank (H).
7. Insert the upper tube (completed upper assembly from
Step 3) into the lower tube (completed lower assembly
from Step 6).
OPERATION
1. While supporting the upper assembly, slightly unscrew
the tank clamp (I) and lower the bottom tube into the
tank.
2. Squeeze the adjustable tube clamp (D) and slide to
the top of the upper tube while supporting the upper
assembly; slowly lower the upper tube into the lower
tube.
3. Move the oil drain under the raised vehicle, ensuring
the funnel is centered directly below the engine oil drain
plug.
4. Using the adjustable tube (D) and tank clamps (I), raise
the funnel until approximately 4” below the engine oil
drain plug.
5. Remove the engine oil drain plug and allow the used oil
to completely drain into the funnel.
6. When complete, follow all federal, state and local laws
for oil disposal and recycling procedures.
MAINTENANCE
Periodically inspect the oil drain. Ensure all parts move
freely. Apply lubrication as needed.
STORAGE
Store the portable oil drain in an upright position and in
a clean, dry area. Do not store near flammable items or
open flames. This could result in injury or explosion or
property damage.
