2
Operating Instructions and Parts Manual
26028
10/18
2018 OEMTOOLS
™
SLIM FOLDING
RECHARGEABLE WORK LIGHT
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your work light. Read this manual carefully.
Learn the light’s applications and limitations, as well as
potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept away
from the work area. Never let a child handle tools or
equipment without strict adult supervision.
4. DO NOT use the work light if the switch does not turn it
on and off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
5. Although eye damage from the OEMTOOLS™ Work
Light is unlikely, never stare directly into the beam.
6. DO NOT attempt to recharge the battery by any means
other than USB, via the cable provided.
7. Check for damage. Check your product regularly. If
part of the product is damaged, it should be carefully
inspected to make sure it can perform its intended
function correctly. If in doubt, discontinue use of the
product.
8. Store idle tools out of the reach of children and
untrained persons. Tools may be dangerous in the
hands of untrained users.
9. Keep work light dry and clean.
11. DO NOT use this product in a damp or wet location.
12. DO NOT submerge this product in water or other liquids.
13. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when
used on another product.
14. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS™ for a replacement.
15. Avoid accidental fire. DO NOT smoke near this product.
16. Keep away from flammables. DO NOT attempt to
operate this work light near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
17. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris.
18. Keep the work light away from medical and electronic
devices. Strong magnets in the light may cause
damage to some devices.
19. We believe the information contained herein to be
reliable. However, general technical information is given
by us without charge and the user shall employ such
information at their own discretion and risk. We assume
no responsibility for results or damages incurred from
the use of such information in whole or in part.
20. The procedures documented in this manual are to
serve as guidelines for the use of this equipment. The
use of this equipment is simple and straightforward
if you follow the instructions. When operating this
equipment, use common sense, and only use this
equipment for its intended purpose.
WARNING
:
Cancer and Reproductive Harm
www.P65warnings.ca.gov
NOTE
: The manufacturer declines any and all
responsibility for damage to vehicles or components if said
damage is the result of unskillful handling by the operator
or of failure to observe the basic safety rules set forth in the
instruction manual.
WARNING
:
Carefully read Rules for Safe Operation and Instructions.
IMPORTANT SAFETY INSTRUCTIONS
:
The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product but must be supplied by the operator.
PURPOSE
The OEMTOOLS™ Slim Folding Rechargeable Work Light
incorporates a small compact design and features super
bright COB LED light that provides light where needed.
A push On/Off button is located on the front of the light.
A magnetic base allows the user to mount to a metal
surface.
PRODUCT SPECIFICATIONS
Mode
High Low
Output (Lumens) 350
175
Max Runtime
2 Hrs.
4 Hrs.
Power Source
3.7V 2200 mAh 18650 Lithium-ion Battery
Charge Time
4 Hrs.
Voltage 3.7V
Power 3W
Beam Distance 85 Ft. (26 m)
Impact Resistant 3.2 Ft. (1 m)
Dimensions
13.25" x 1.31" x 1.31"
Weight
0.25 Lbs.