Oemtools 25245 Operating Instructions And Parts Manual Download Page 4

4

Operating Instructions and Parts Manual 

25245

NO CONTACT INFRARED 

THERMOMETER

10/18

2018 OEMTOOLS

OPERATIONS:

1.  View in Celsius or Fahrenheit 
2.  Equipped with a laser for aiming
3.  Temperature hold
4.  LCD backlight
5.  7 seconds delay auto power off
6.  Light weight and easy operation

WARNING

   

This manual contains information that relates to 
PROTECTING PERSONAL SAFETY and PREVENTING 
ACCIDENT AND INJURY:
1.  Before you use this unit, check on the plastic 

housing carefully. If there is any damage, do not 
use it.

2.  Do not point laser directly at eye or indirectly off 

reflective surfaces. Uses Laser Radiation; do not 
stare into the beam. Class II Laser product.

3.  Do not use this unit near explosive gas, steam  

or dust.

 

CAUTION

 

To avoid the damage of the unit or the target, please 
protect from the following situations:
1.  EMF (electro-magnetic fields) from arc welders, 

induction heaters, etc..

2.  Thermal shock (caused by large or abrupt ambient 

temperature changes) allows 30 minutes for unit to 
stabilize before use.

3.  Do not leave the unit on or near objects of high 

temperature.

Distance to spot size:

When taking a measurement, pay attention to the 
distance to spot size. As the distance (D) from the 
target surface increases, the spot size (S) of the area 
measured by the unit gets larger.

The distance to spot size of the unit is 12:1. This unit is 
equipped with a laser, which is used for aiming. 

Field of view:

Make sure the target is larger than the unit’s spot size. 
The smaller the target is the closer the measurement of 
the distance. When accuracy is critical, make sure the 
target is at least twice as large as the spot size.

Temperature 
range

(-58ºF to 716ºF)
(-50ºC to 380ºC)

Accuracy:
Whichever is
greater

-50ºC (-58ºF) ~0ºC (32ºF):
±3ºC (±5ºF)
0ºC (-32ºF) ~716ºC (1321ºF): 
±1.5ºC (±2.7ºF) or ±1.5%

Resolution

0.1ºC or 0.1ºF 

Repeatability

1% of Reading or 1ºC

Response time 500mS, 95% Response

Spectral  
response

8-14um

Emissivity

0.95 Preset

Distance to 
spot size

12:1

Operating  
temperature

0~40ºC (32~104ºF)

Operating  
humidity

10~95% RH Non-Condensing, 
Up to 30ºC (86ºF)

Storage  
temperature

-20~60ºC (-4-140ºF)

Power

(1) 9V Battery

Typical  
battery lift 
(Alkaline)

Non-Laser Mode: 22 Hours
Laser Mode: 12 Hours

Weight

 5.2 oz (147.5 g)

Resolution

6” x 4” x 1.7” (153 x 101 x 43 mm)

PRODUCT SPECIFICATIONS

Summary of Contents for 25245







Reviews: