Oemtools 25245 Operating Instructions And Parts Manual Download Page 1

UNPACKING

After unpacking unit, inspect carefully for any damage 
that may have occurred during transit. Check for loose, 
missing, or damaged parts. If any damage is observed, 
a shipping damage claim must be filed with carrier.  
Do not use Infrared Thermometer if broken, bent, 
cracked or damaged parts (including labels) are noted.  
Infrared Thermometer damaged in any way, operates 
abnormally or is missing parts should be removed from 
service immediately.  If you suspect that the Infrared 
Thermometer was subjected to a shock load (a load that 
was dropped suddenly, unexpectedly, etc.) immediately 
discontinue use until it has been checked by a factory 
authorized service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

Operating Instructions and Parts Manual 

25245

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

NO CONTACT INFRARED 

THERMOMETER

The following safety information is provided as a guideline to help you operate your Infrared Thermometer under the 
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe 
handling instructions are not known or not followed. The following safety instructions are to provide the user with the 
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use 
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain 
that anyone that uses the equipment understands and follows these safety instructions as well.

Explanation of Safety Signal Words

CAUTION

Notes

CAUTION

WARNING

WARNING

WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage. 

: Provide clarity and helpful information.

10/18

2018 OEMTOOLS

: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov.

Summary of Contents for 25245







Reviews: