2
Operating Instructions and Parts Manual
24887
4,500 CFM 3 SPEED
EVAPORATIVE COOLER
1/18
2018 OEMTOOLS
™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the product’s
applications and limitations, as well as potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work areas invite
accidents.
3. Keep children away. All children should be kept away from the work
area. Never let a child handle tools or equipment without strict adult
supervision.
4. DO NOT operate this product if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, DO NOT
attempt to operate.
5. Use safety equipment. Eye protection should be worn at all times
when operating this tool. Use ANSI approved safety glasses. Everyday
eyeglasses are NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat or hearing protection should be used in appropriate
conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings, bracelets
or other jewelry may present a potential hazard when operating this
product. Keep all apparel clear of the product.
7. DO NOT overreach. Keep proper footing and balance at all times when
operating this product.
8. Check for damage. Check equipment regularly. If part of the product
is damaged, it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, discontinue use of
product.
9. Keep away from flammables. DO NOT attempt to operate this product
near flammable materials or combustibles. Failure to comply may
cause serious injury or death.
10. Store this product out of the reach of children and untrained persons.
This product may be dangerous in the hands of untrained users.
11. Keep this product dry and clean.
12. Use only accessories that are recommended by the manufacturer for
your model. Accessories that may be suitable for one product may
become hazardous when used on another product.
13. Service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a
risk of injury.
14. When servicing a product, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of injury.
15. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the work
area free of obstructions, grease, oil, trash, and other debris. Do not
use this product in a damp or wet location.
16. Maintain labels and nameplates on this product. These carry important
information. If unreadable or missing, contact OEMTOOLS
™
for a
replacement.
17. Keep this product dry, clean, and free from brake fluid, oil, and grease.
18. Avoid accidental fire. DO NOT smoke near this product.
19. The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors
which cannot be built into this product, but must be supplied by the
operator.
20. We believe the information contained herein to be reliable. However,
general technical information is given by us without charge and the
user shall employ such information at their own discretion and risk.
We assume no responsibility for results or damages incurred from the
use of such information in whole or in part.
21. The manufacturer declines any and all responsibility for property
damage or injury if said damage is the result of unskillful handling by
the operator or of failure to observe the basic safety rules set forth in
the instruction manual.
22. The procedures documented in this manual are to serve as guidelines
for the use of this equipment.
23. The use of this equipment is simple and straightforward if you follow
the instructions. When operating this equipment, use common sense,
and only use this equipment for its intended purpose.
PRODUCT DESCRIPTION
The OEMTOOLS
™
24887 4,500 CFM 3 Speed Evaporative Cooler
is designed to efficiently cool workspaces. This Evaporative Cooler
pulls hot surrounding air through wet cooling pads, where through
process of evaporation, the air is cooled. The powerful 0.25 HP fan
then pushes the cooled air at 4,500 CFM into the surrounding area—
cooling spaces up to 1,300 ft².
PRODUCT SPECIFICATIONS
Motor Power
0.25 HP
Input Voltage
110V AC, 1-Phase
Speed Settings
3
Max Air Volume
4,500 CFM
Water Capacity
14.6 Gallons
Cooling Area
Up to 1,300 ft²
Run Time
Up to 4 Hours
Dimensions
45
"
(L) x 28
"
(W) x 17
"
(H)
Dry Weight
58 Lbs.
CONTENTS
(1) Evaporative Cooler, (4) Casters, (1) Instruction Manual
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
WARNING
:
Thoroughly read and understand the provided product
manual before attempting to use this product.
1. DO NOT touch the Evaporative Cooler when your hands are wet.
2. DO NOT disassemble, repair or rebuild the Evaporative Cooler. Contact
qualified personnel for any maintenance extending past the instruction
provided by this manual.
3. Unplug the Evaporative Cooler when it is not in use.
4. Unplug the Evaporative Cooler before moving it or performing
maintenance.
5. DO NOT unplug the Evaporative Cooler by holding the cord. Unplug by
holding the plug.
6. DO NOT use the Evaporative Cooler when there is damage to the cord
or plug. Discard the Evaporative Cooler or return to an authorized
service facility for examination and/or repair.
7. Avoid the use of extension cords when possible. Ensure that they
are UL listed if they must be used. DO NOT use a single extension
cord to operate more than one Evaporative Cooler. DO NOT plug the
Evaporative Cooler into any other cord-connected device (power strip,
surge protector, multiple outlet adapters, etc.).
8. DO NOT use the Evaporative Cooler close to any fire or heat source.
9. DO NOT insert your hand or other objects into the rear housing when
the blade is moving.
10. To reduce the risk of fire or electric shock, DO NOT use this
Evaporative Cooler with any solid-state speed control device.
11. DO NOT run cord under carpeting. DO NOT cover cord with throw rugs,
runners, or similar coverings. DO NOT route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over.
12. DO NOT submerge the Evaporative Cooler in liquids.
13. Confirm the rear panel is attached prior to operation.
14. ALWAYS place the Evaporative Cooler on a flat, level surface.
15. DO NOT expose electrical connections to water.
16. DO NOT touch electrically live components.
17. DO NOT open the electrical box while the product is in use.
18. Ensure adequate ventilation.
