background image

UNPACKING

After unpacking unit, inspect carefully 
for any damage that may have 
occurred during transit. Check for 
loose, missing, or damaged parts. If 
any damage is observed, a shipping 
damage claim must be filed with 
carrier.  Do not use the Hydraulic 
Truck Jack if broken, bent, cracked or 
damaged parts (including labels) are 
noted.  Any Hydraulic Truck Jack that 
appears damaged in any way, operates 
abnormally or is missing parts should 
be removed from service immediately.  
If you suspect that the Hydraulic Truck 
Jack was subjected to a shock load 
(a load that was dropped suddenly, 
unexpectedly, etc.) immediately 
discontinue use until it has been 
checked by a factory authorized service 
center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

Operating Instructions and Parts Manual 

24851

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

22 TON 

AIR/HYDRAULIC JACK

Explanation of Safety Signal Words

CAUTION

Notes

CAUTION

WARNING

The following safety information is provided as guidelines to help you operate your 22 Ton Air/Hydraulic Jack under 

the safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe 

handling instructions are not known or not followed. The following safety instructions are to provide the user with the 

information necessary for safe use and operation. Please read and retain these instructions for the continued safe use 

of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain 

that anyone that uses the equipment understands and follows these safety instructions as well. 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or 

other reproductive harm.

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

: Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage. 

: Provide clarity and helpful information.

09/14

2014 ©OEM-TOOLS

Summary of Contents for 24851










Reviews: