background image

8

Operating Instructions and Parts Manual 

24818

COMPACT INVERTER STICK 

WELDER 110V 70A

2/18

2018 OEMTOOLS

CONTACT US

3580 E. Raines Road, Suite 3, Memphis, TN 38118  

(1-866-458-2472)

email: [email protected]

OEMTOOLS

 ONE YEAR WARRANTY

For up to one year from the date of purchase of this OEMTOOLS

 product, if you find any defect in material or workmanship 

(through normal usage), return it to the place of purchase or to OEMTOOLS

 for repair or replacement at our discretion. In 

order to obtain this service, send the product and proof of purchase (transportation pre-paid) to: 
OEMTOOLS

 Q.A. Dept, 3580 E. Raines Road #3, Memphis, TN 38118. 

We will not be responsible for lost or damaged goods during transportation; please insure your package. If our inspection 

verifies the defect, we will either repair or replace the product, or we may elect to refund the purchase price if we cannot 

readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine 

there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost 

of returning the product. 
OEMTOOLS

 does not provide warranty for products labeled other than OEM

®

 or OEMTOOLS

. OEMTOOLS

 will not 

provide any warranty for products subjected to abnormal use. Abnormal use includes (but is not limited to) abuse, accident, 

alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does not cover bits, blades, files, 

batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits, files, and batteries 

as necessary. OEMTOOLS

 reserves the right to make any changes in construction or design at any time without any 

obligation in incorporating such changes to tools or equipment previously sold. OEMTOOLS

 makes every effort to ensure 

that its products meet high quality and durability standards, and warrants to the original purchaser that this product is 

free from defects in materials and workmanship for the period of one year from the date of purchase. This warranty does 

not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations outside our 

facilities, criminal activity, improper installation, normal wear and tear or to lack of maintenance. 
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential 

damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or 

consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU 

OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. 

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Don’t forget to register your new OEMTOOLS

 product at www.oem-tools.com.

Summary of Contents for 24818









Reviews: