2
Operating Instructions and Parts Manual
24648
RECHARGEABLE MULTI-HEAD
ALL-IN-ONE WORK LIGHT KIT
5/17
2017 OEMTOOLS
™
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your work light. Read this manual carefully. Learn
the work light’s applications and limitations, as well as
potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept away
from the work area. Never let a child handle a tool
without strict adult supervision.
4. Use safety equipment. Eye protection should be worn
at all times when working this light tool. Use ANSI
approved safety glasses. Everyday eyeglasses are NOT
safety glasses. Dust mask, non-skid safety shoes, hard
hat or hearing protection should be used in appropriate
conditions.
5. Do not use the work light if the switch does not turn it
on and off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
6. Check for damage. Check your work light and batteries
regularly. If part of the work light is damaged, it should
be carefully inspected to make sure that it can perform
its intended function correctly. If in doubt, the part
should be repaired or replaced.
7. Keep away from flammables. Do not attempt to
operate this work light near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
PRODUCT SPECIFICATIONS
(FLASHLIGHT)
Dimensions:
2" (Length) x 1.88" (Diameter)
Max Output:
350 Lumens
Low Output:
175 Lumens
Runtime @ Max Output: 2.5 Hours
Runtime @ Low Setting: 5.5 Hours
Beam Distance:
150 m
Impact Resistance:
1 m
Water Resistance: IP54
PRODUCT SPECIFICATIONS
(INSPECTION LIGHT)
Dimensions:
9.5" (Length) x
0.88" (Head Width) x
1.25" (Base Diameter)
Max Output:
350 Lumens
Low Output:
175 Lumens
Runtime @ Max Output: 2.5 Hours
Runtime @ Low Setting: 5 Hours
Beam Distance:
24 m
Impact Resistance:
1 m
Water Resistance: IP54
OPERATING INSTRUCTIONS
1. Basic operation: slightly press the black button on the
body to turn the light on.
2. Light mode operation: press once for low brightness
setting, press again for max brightness setting.
To use the TRUE UV LED light, press the purple
button on the back of the ultra slim inspection light
attachment. To turn off, press the purple button
again. To focus Extension Light Attachment, gently
pull the focusing light head away from the flexible
extension to desired focus.
3. To change the work light to the ultra slim inspection
light or flex light, slide the green quick-attachment
coupler toward the handle to release attachment.
Take desired attachment and press into handle input
until the green coupler engages with an audible click.
Store the attachment not being used in a safe place to
prevent damage to the lights.
CHARGING INSTRUCTIONS
1. Plug the USB cord into the USB port on the work light.
2. Make sure 18650 battery is correctly placed into the
body of the work light.
3. Plug USB cord into charging unit.
4. Plug charging unit into 120V outlet.
5. (1) 18650 Li-Ion battery will fully recharge in 5 hours. At
100% power, you should have a fully charged beam for
up to 2.5 hours.
PRODUCT SPECIFICATIONS
(FLEXIBLE SHAFT LIGHT)
Dimensions:
17" (Length) x
0.75" (Head Width) x
1.25" (Base Diameter)
Max Output:
180 Lumens
Low Output:
90 Lumens
Runtime @ Max Output: 2.5 Hours
Runtime @ Low Setting: 5 Hours
Beam Distance:
23 m
Impact Resistance:
1 m
Water Resistance: IP54
