background image

UNPACKING

After unpacking unit, inspect 
carefully for any damage that 
may have occurred during transit. 
Check for loose, missing, or 
damaged parts. If any damage 
is observed, a shipping damage 
claim must be filed with carrier.  
Do not use Battery Tester if 
broken, bent, cracked or damaged 
parts (including labels) are noted.  
Any Battery Tester that appears 
damaged in any way, operates 
abnormally or is missing parts 
should be removed from service 
immediately.  If you suspect that 
the Digital Battery Analyzer was 
subjected to a shock load (a 
load that was dropped suddenly, 
unexpectedly, etc.) immediately 
discontinue use until it has been 
checked by a factory authorized 
service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

Operating Instructions and Parts Manual 

24369

05/15

2015 ©OEMTOOLS

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

DIGITAL BATTERY

 ANALYZER

Explanation of Safety Signal Words

CAUTION

WARNING

The following safety information is provided as guidelines to help you operate your Digital Battery Analyzer under the safest 

possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling 

instructions are not known or not followed. The following safety instructions are to provide the user with the information 

necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service 

system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses 

the equipment understands and follows these safety instructions as well. 

WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. 

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. 

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, 

may result in property damage. 

: Provide clarity and helpful information.

CAUTION
Notes

Summary of Contents for 24369









Reviews: