3
Operating Instructions and Parts Manual
23980
12/18
2018 OEMTOOLS
™
24" OSCILLATING
MISTING WALL MOUNT FAN
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
WARNING
1. Unplug the fan before moving it or performing
maintenance. DO NOT touch the fan when your hands
are wet.
2. Those who are not qualified electricians should not
disassemble, repair or rebuild the fan.
3. Unplug the fan when it is not in use.
4. DO NOT unplug the fan by holding the cable cord.
Unplug by holding the plug.
5. DO NOT use the fan when there is damage to the cable
cord or plug.
6. Avoid the use of extension cords when possible. If
it is unavoidable, ensure that they are UL listed. DO
NOT use a single extension cord to operate more
than one fan. DO NOT plug the fan into any other
cord-connected device (power strip, surge protector,
multiple outlet adapters, etc.).
7. DO NOT use the fan close to any fire or heat source.
8. DO NOT insert your hand or other objects into the
guard or the movable parts.
9. To reduce the risk of fire or electric shock, DO NOT use
this fan with any solid-state speed control device.
10. DO NOT operate any fan with a damaged cord or plug.
Discard the fan or return it to an authorized service
facility for examination and/or repair.
11. DO NOT run cord under carpeting. DO NOT cover cord
with throw rugs, runners or similar coverings. DO NOT
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
12. DO NOT use if electrical cord is frayed or bent.
CAUTION
13. DO NOT immerse the fan in water or any liquid.
14. Fit the guard onto fan before starting up the fan.
15. This fan is not intended for use by people (including
children) with reduced physical, sensory or mental
capabilities or lack of experience and knowledge
unless they have been given supervision or instructions
concerning use of the fan by a person responsible for
their safety. Supervise children to ensure they do not
play with the fan.
16. Always place the fan on a stable, flat and level
surface when operating to avoid the chance of the fan
overturning.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. DO NOT use any
water for cleaning metal surfaces. Using a soft cloth, wipe
off the surfaces of the fan. In order to remove the dust
from the grill, use a vacuum cleaner or remove the front
grill by removing the securing screw on the edge of the
grill with a screwdriver. After cleaning, remount the grill.
Then fasten 8 securing screws on the edge of the grill.
MISTING NOZZLE MAINTENANCE
If the misting nozzles become clogged, remove them from
the grill and wash them with water. Use a non-metallic
brush to scrub them if necessary. If the problem still
exists, use the replacement nozzle or contact customer
service for assistance. Never clear the nozzles with pins
or other sharp objects.
Nozzle
MISTING HOSE VALVE MAINTENANCE
If the misting hose valve becomes clogged, unscrew it
from the garden hose and flush it with running water to
remove debris, making sure the filter washer is clean.
Hose Connector
Valve
Filter With Seal Ring
