
ENABLE SWITCH
UPPER
POSITION
ON
Enable switch turned to ON position
enables the high voltage output.
Enable switch could be used instead of
Enable signal of interface and they
shouldn’t be used at the same time.
BOTTOM
POSITION
OFF
HV OUTPUT:
Phoenix Contact 1757268
PIN (color)
DESIGNATION
DESCRIPTION
1
HV OUTPUT
High voltage output (amplified INPUT) of
the QBX-08 driver.
4
GND
2, 3
N/C
-
Mating part (Phoenix Contact 1758377) is supplied together with the driver.
LEDs
There is a Ready LED onboard indication the driver is ON and ready to
work.
Grounding and mounting
Grounding policy
By default INPUT negative, HV OUTPUT negative and 24VDC return (via filtering choke)
are interconnected to each other and to chassis ground (through the mounting pads).
Driver is to be mounted with four M3 screws.