7
2. Installing memory card
Remove outward the white tenon at
the two ends of the interface slot for
module of the memory card.
Please install the memory card in accordance with the following
procedures:
1)
Remove the white tenon at the two ends of the interface slot for
the memory card;
2)
Align the golden finger of the memory card to the throve of the
interface slot and pay attention the concave hole of golden finger
should be aligned to the convex point of the slot;
3)
Finally, insert the memory card into the interface slot gentlely. If
no error occurs at the moment, insert the card forward in the slot
till the white buckle is automatically engaged in the concave hole
at the two sides of the memory card.
Note
In order to avoid damages to the motherboard or the components,
the user must make sure the power supply to the computer is
turned off before the memory card or other system component is
installed or removed. As the throve is set at the golden finger of the
DDR DIMM memory card, the memory card can only be inserted
into the slot with one direction. During installation, the user only
needs to align the golden finger and the dual-channel throve of the
interface slot and insert it gentlely. To avoid damage, never apply
excessive force in that process.
